更新时间：2010.11.19 文件大小：4MB 查看次数：

点击下载

S3C8-SERIES MICROCONTROLLERS
Samsung's S3C8-series of 8-bit single-chip CMOS microcontrollers offers a fast and efficient CPU, a wide range of integrated peripherals, and various mask-programmable ROM sizes. The major CPU features are:

• Efficient register-oriented architecture
• Selectable CPU clock sources
• Idle and Stop power-down mode released by interrupt or reset
• Built-in basic timer with watchdog function

A sophisticated interrupt structure recognizes up to eight interrupt levels. Each level can have one or more interrupt sources and vectors. Fast interrupt processing (within a minimum of four CPU clocks) can be assigned to specific interrupt levels.

S3C84MBJ/F84MBJ MICROCONTROLLER
The S3C84MBJ/F84MBJ single-chip CMOS microcontrollers are fabricated using the highly advanced CMOS process, based on Samsung’s latest CPU architecture.
The S3C84MBJ is a microcontroller with a 64K-byte mask-programmable ROM embedded.
The S3F84MBJ is a microcontroller with a 64K-byte Full-Flash ROM embedded.
Using a proven modular design approach, Samsung engineers have successfully developed the S3C84MBJ/F84MBJ by integrating the following peripheral modules with the powerful SAM8RC core:

• Nine programmable I/O ports, including eight 8-bit ports and one 6-bit ports, for a total of 70 pins.
• Ten bit-programmable pins for external interrupts.
• One 8-bit basic timer for oscillation stabilization and watchdog function (system reset).
• Four 8-bit timer/counter and two 16-bit timer/counter with selectable operating modes.
• 3 asynchronous UART
• 2 synchronous SIO
• 15-channel A/D converter

The S3C84MBJ/F84MBJ is versatile microcontroller for CD-ROM and ADC application, etc. They are currently available in 80-pin QFP and 80-pin TQFP package.

• CPU
  - SAM8RC core
• Memory
  - 2064-bytes internal register file
  - 64K-bytes internal program memory
  - S3C84MB: Mask ROM
  - S3F84MB: Flash type memory
• Oscillation Sources
  - Crystal, Ceramic
  - CPU clock divider (1/1, 1/2, 1/8, 1/16)
• Instruction Set
  - 78 instructions
  - IDLE and STOP instructions added for powerdown modes
• Instruction Execution Time
  - 400 ns at 10-MHz fOSC (minimum)
• Interrupts
  - 27 interrupt sources with 27 vectors.
  - 8 level, 27 vector interrupt structure
• I/O Ports
  - Total 70 bit-programmable pins
• Timers and Timer/Counters
  - One programmable 8-bit basic timer (BT) for oscillation stabilization control or watchdog-timer function.
  - One 8-bit timer/counter (Timer A) with three operating modes; Interval mode, capture mode and PWM mode.
  - One 8-bit timer/counter (Timer B) Carrier frequency (or PWM) generator.
  - Two 8-bit timer with PWM mode (Timer C0,C1)
  - Two 16-bit capture timer/counter (Timer 10,11) with two operating modes; Interval mode, Capture mode for pulse period or duty.
• A/D Converter
  - 10-bit resolution
  - 15 analog input channels
  - Max 2.5MHz fADC clock.
• PWM
  - Two 14-bit PWM
  - Two 8-bit PWM
• Asynchronous UART
  - Full duplex 3 channels UARTs
  - Programmable baud rate
  - Supports serial data transmit/receive operations with 8-bit, 9-bit in UART
• Synchronous SIO
  - Programmable baud rate
  - Two synchronous serial I/O modules
• Pattern Generation Module
  - Pattern generation module triggered by timer match signal and S/W.
• Operating Temperature Range
  - -40°C to + 85°C
• Operating Voltage Range
  - 2.4 V to 5.5 V at 10MHz f_OSC
  - 4.5 V to 5.5 V at 16MHz f_OSC
• Package Type
  - 80 pin QFP, 80 pin TQFP
• Built-in RESET circuit (LVR)
  - Low Voltage check to make system reset
  - VLVR = 2.8 / 4.0 V (by Smart Option)
• Smart Option