更新时间：2010.11.19 文件大小：4MB 查看次数：

点击下载

S3C8-SERIES MICROCONTROLLERS

Samsung's S3C8 series of 8-bit single-chip CMOS microcontrollers offers a fast and efficient CPU, a wide range of integrated peripherals, and various mask-programmable ROM sizes. Among the major CPU features are:

- Efficient register-oriented architecture
- Selectable CPU clock sources
- Idle and Stop power-down mode release by interrupts
- Built-in basic timer with watchdog function

A sophisticated interrupt structure recognizes up to eight interrupt levels. Each level can have one or more interrupt sources and vectors. Fast interrupt processing (within a minimum of four CPU clocks) can be assigned to specific interrupt levels.

S3C828BX/F828BX/C8289X/F8289X/C8285X/F8285X MICROCONTROLLER
The S3C828BX/F828BX/C8289X/F8289X/C8285X/F8285X single-chip CMOS microcontroller are fabricated using the highly advanced CMOS process, based on Samsung's newest CPU architecture.

The S3C828BX, S3C8289X, S3C8285X are a microcontroller with a 64K-byte, 32K-byte, 16K-byte mask-programmable ROM embedded respectively.

The S3F828BX is a microcontroller with a 64K-byte Flash ROM embedded.
The S3F8289X is a microcontroller with a 32K-byte Flash ROM embedded.
The S3F8285X is a microcontroller with a 16K-byte Flash ROM embedded.

Using a proven modular design approach, Samsung engineers have successfully developed the S3C828BX/F828BX/C8289X/F8289X/C8285X/F8285X by integrating the following peripheral modules with the powerful SAM8 core:

- Nine programmable I/O ports, including six 8-bit ports, and one 7-bit port, one 6-bit port, one 4-bit port, for a total of 65 pins.
- Eight bit-programmable pins for external interrupts.
- One 8-bit basic timer for oscillation stabilization and watchdog functions (system reset).
- Two 8-bit timer/counter and two 16-bit timer/counter with selectable operating modes.
- Watch timer for real time.
- LCD Controller/driver
- A/D converter with 8 selectable input pins
- Synchronous SIO modules

The S3C828BX/F828BX/C8289X/F8289X/C8285X/F8285X is versatile microcontroller for camera, LCD and ADC application, etc. They are currently available in 80-pin TQFP and 80-pin QFP package

FLASH
The S3F828BX/F8289X/F8285X are FLASH version of the S3C828BX/C8289X/C8285X microcontroller. The S3F828BX microcontroller has an on-chip FLASH ROM instead of a masked ROM. The S3F828BX/F8289X/F8285X is comparable to the S3C828BX/C8289X/C8285X, both in function and in pin configuration. The S3F828BX only is a full flash. The full flash means that data can be written into the program ROM by an instruction.

• CPU
  - SAM88 RC CPU core
• Memory
  - Program Memory (ROM)
  - 64K x 8 bits program memory (S3C828BX/F828BX)
  - 32K x 8 bits program memory (S3C8289X/F8289X)
  - 16K x 8 bits program memory (S3C8285X/F8285X)
  - Internal flash memory (program memory)
  - Sector size: 128 bytes
  - 10 years data retention
  - Fast programming time:
  + chip erase: 50ms
  + sector erase: 10ms
  + byte program: 30µs
  - User programmable by 'LDC' instruction
  - Endurance: 10,000 erase/program cycles
  - Sector (128 bytes) erase available
  - Byte programmable
  - External serial programming support
  - Expandable OBPTM (on board program) sector
  - Data Memory (RAM)
  - Including LCD display data memory
  - 2614 x 8 bits data memory (S3C828BX/F828BX)
  - 1078 x 8 bits data memory (S3C8289X/F8289X)
  - 566 x 8 bits data memory (S3C8285X/F8285X)
• Instruction Set
  - 78 instructions
  - Idle and stop instructions added for power-down modes
• 65 I/O Pins
  - I/O: 25 pins
  - I/O: 40 pins (Sharing with LCD signal outputs)
• Interrupts
  - 8 interrupt levels and 18 interrupt sources
  - Fast interrupt processing feature
• 8-Bit Basic Timer
  - Watchdog timer function
  - 4 kinds of clock source
• 8-Bit Timer/Counter A
  - Programmable 8-bit internal timer
  - External event counter function
  - PWM and capture function
• 8-Bit Timer/Counter B
  - Programmable 8-bit internal timer
  - Carrier frequency generator
• 16-Bit Timer/Counter 0
  - Programmable 16-bit internal timer
• 16-Bit Timer/Counter 1
  - Programmable 16-bit internal timer
  - External event counter function
  - PWM and capture function
• Watch Timer
  - Interval time: 3.91mS, 0.25S, 0.5S, and 1S at 32.768 kHz
  - 0.5/1/2/4 kHz Selectable buzzer output
• LCD Controller/Driver
  - 32 segments and 8 common terminals
  - 1/2, 1/3, 1/4, and 1/8 duty selectable
  - Internal resistor circuit for LCD bias
• Analog to Digital Converter
  - 8-channel analog input
  - 10-bit conversion resolution
  - 25uS conversion time
• UART
  - Full-duplex serial I/O interface
  - Four programmable operating modes
• 8-bit Serial I/O Interface
  - 8-bit transmit/receive mode
  - 8-bit receive mode
  - LSB-first or MSB-first transmission selectable
  - Internal or External clock source
• Battery Level Detector
  - 3-creteria voltage selectable (2.2 V, 2.4 V, 2.8 V)
  - En/Disable by software for current consumption
• Low Voltage Reset (LVR)
  - Criteria voltage: 2.2V
  - En/Disable by smart option (ROM address: 3FH)
• Two Power-Down Modes
  - Idle: only CPU clock stops
  - Stop: selected system clock and CPU clock stop
• Oscillation Sources
  - Crystal, ceramic, or RC for main clock
  - Main clock frequency: 0.4 MHz - 11.1 MHz
  - 32.768 kHz crystal oscillation circuit for sub clock
• Instruction Execution Times
  - 360nS at 11.1 MHz fx (minimum)
• Operating Voltage Range
  - 2.0 V to 3.6 V at 0.4 - 4.2 MHz
  - 2.7 V to 3.6 V at 0.4 - 10.0 MHz
  - 3.0 V to 3.6 V at 0.4 - 11.1 MHz
• Operating Temperature Range
  - -25°C to +85°C
• Package Type
  - 80-QFP-1420C, 80-TQFP-1212
• Smart Option
  - Low Voltage Reset (LVR) level and enable/disable are at your hardwired option (ROM address 3FH)
  - ISP related option selectable (ROM address 3EH)